LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Suspension System (Rear) - Service Information (Coupe)) >> Performance Damper >> Installation [04/2020 - ] >> Procedure

Installation [04/2020 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SUSPENSION TOWER DAMPER 
    1. Install the rear suspension tower damper assembly with the 2 nuts.

      Torque: 39 N.m (398 kgf/cm, 29 ft.lbf) 

      NOTE:

      Do not compress or extend the rear suspension tower damper assembly.

      HINT: 

      Make sure to install the suspension tower damper with the label facing front of the vehicle.

      GTY957534Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Label
      front of the Vehicle
  2. INSTALL REAR BUMPER ASSEMBLY 

    Refer to INSTALLATION [03/2017 - ]