Removal [05/2023 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.

CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM
Refer to PROCEDURE - Step 2 [05/2023 - 09/2023] , or refer to PROCEDURE - Step 2 [09/2023 - ]
REMOVE COMBINATION METER ASSEMBLY
Refer to REMOVAL [03/2017 - ]

REMOVE INSTRUMENT PANEL SAFETY PAD COVER

Place both hands at the position shown in the illustration and pull in the direction indicated by the arrow to detach the clip and remove the instrument panel safety pad cover.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Place Hands Here
	Remove in this Direction

REMOVE NO. 2 INSTRUMENT PANEL SAFETY PAD COVER

Using moulding remover A, detach the clip as shown in the illustration and remove the No. 2 instrument panel safety pad cover.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Insert Moulding Remover A Here
	Remove in this Direction

REMOVE MULTI-DISPLAY WITH BRACKET

Remove the 2 bolts.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Place both hands at the position shown in the illustration and pull in the direction indicated by the arrow to detach the clip and remove the multi-display with bracket.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

	Place Hands Here
	Remove in this Diretion

Detach the clamp and disconnect the 4 connectors, and remove the multi-display with braket.

REMOVE MULTI-DISPLAY CONTROLLER BRACKET A

Remove the 4 screws and multi-display controller bracket A.

REMOVE MULTI-DISPLAY