LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Meter / Gauge / Display - Service Information (Coupe)) >> Combination Meter >> Removal [03/2017 - ] >> Procedure

Removal [03/2017 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM 

    Refer to PROCEDURE - Step 2 [03/2017 - 09/2018] , or refer to PROCEDURE - Step 2 [09/2018 - 05/2023] , or refer to REMOVAL [05/2023 - 09/2023] , or refer to REMOVAL [09/2023 - ]

  2. REMOVE CENTER UPPER INSTRUMENT CLUSTER FINISH PANEL 

    Refer to PROCEDURE - Step 7 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 7 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 7 [04/2020 - 05/2023] , or refer to REMOVAL [05/2023 - ]

  3. REMOVE METER HOOD SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 8 [03/2017 - 06/2019] , or refer to PROCEDURE - Step 8 [06/2019 - 04/2020] , or refer to PROCEDURE - Step 8 [04/2020 - 05/2023] , or refer to REMOVAL [05/2023 - ]

  4. REMOVE COMBINATION METER ASSEMBLY 
    1. Remove the 4 screws.
      GTY802669Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. GTY832743Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here
      Remove in this Direction

      Detach the claws and guides as shown in the illustration.

    3. GTY802653Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Detach the wire harness clamps and disconnect the 2 connectors.

    4. GTY793995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction

      Remove the combination meter assembly as shown in the illustration.

  5. REMOVE METER HOOD SPACER 
    1. GTY810073Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Detach the claws and remove the meter hood spacer.

scientia non olet · About LEMON Manuals