LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500h >> Repair and Diagnosis >> External Pages >> Different car >> Section 116 (Engine Cooling System - Service Information (Coupe)) >> Coolant >> Replacement [09/2023 - ] >> Procedure

Replacement [09/2023 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2024 Lexus LC 500, 2023 Lexus LC 500, 2022 Lexus LC 500, 2021 Lexus LC 500, and 2020 Lexus LC 500. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 1

  2. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH 

    Refer to PROCEDURE - Step 2

  3. REMOVE RADIATOR SUPPORT TO FRAME SEAL RH 

    Refer to PROCEDURE - Step 3

  4. REMOVE LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 4

  5. REMOVE NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 5

  6. REMOVE FRONT FENDER SEAL LH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 6

  7. REMOVE FRONT FENDER SEAL RH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 7

  8. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY LH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 8

  9. REMOVE FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY RH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 9

  10. REMOVE NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 10

  11. DRAIN ENGINE COOLANT 

    Refer to PROCEDURE - Step 11

  12. ADD ENGINE COOLANT 

    Refer to PROCEDURE - Step 12

  13. INSPECT FOR COOLANT LEAK 

    Refer to PROCEDURE - Step 3

  14. INSTALL NO. 2 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 14

  15. INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY RH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 15

  16. INSTALL FRONT SUSPENSION MEMBER BRACE SUB-ASSEMBLY LH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 16

  17. INSTALL FRONT FENDER SEAL RH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 17

  18. INSTALL FRONT FENDER SEAL LH (w/ Front Suspension Member Brace) 

    Refer to PROCEDURE - Step 18

  19. INSTALL NO. 1 ENGINE UNDER COVER ASSEMBLY 

    Refer to PROCEDURE - Step 19

  20. INSTALL LOWER RADIATOR AIR DEFLECTOR 

    Refer to PROCEDURE - Step 20

  21. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH 

    Refer to PROCEDURE - Step 21

  22. INSTALL RADIATOR SUPPORT TO FRAME SEAL LH 

    Refer to PROCEDURE - Step 22

  23. INSTALL V-BANK COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 23

scientia non olet · About LEMON Manuals