Installation [06/2019 - ]: Procedure

1. Connect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   	Bolt
   	Connector

2. Attach the guide and install the vehicle approaching speaker assembly with the bolt.

   Torque: 19 N*m (194 kgf*cm, 14 ft.*lbf) 

   NOTE:

   • When installing the vehicle approaching speaker assembly, take care not to damage it.
   • Do not push the vehicle approaching speaker assembly center area.

Refer to INSTALLATION [01/2017 - 05/2023] , or refer to INSTALLATION [05/2023 - ]