LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System (Ext) - Service Information (Convertible) >> Front Turn Signal Light Assembly >> Installation [07/2020 - ] >> Procedure

Installation [07/2020 - ]: Procedure

  1. INSTALL FRONT TURN SIGNAL LIGHT ASSEMBLY LH 
    1. Install the front turn signal light assembly LH with the 3 screws.
      GTY812057Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Screw
      Connector
    2. Connect the connector and attach the wire harness clamp.
    3. Attach the claw to connect the connector.
  2. INSTALL FRONT BUMPER ASSEMBLY 

    Refer to INSTALLATION [07/2020 - 05/2023] , or refer to INSTALLATION [05/2023 - ]

scientia non olet · About LEMON Manuals