Removal [07/2020 - 05/2023]: Procedure

Refer to REMOVAL [07/2020 - 05/2023]

1. Remove the 2 screws and 2 front fender liner retainers.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *A	for Upper Side
   *B	for Lower Side

1. Disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

2. Using a gasket scraper, remove the No. 2 moulding tape sticking to the front marker light assembly LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   No. 2 Moulding Tape

   NOTE:

   • Do not damage the front marker light assembly LH and front bumper assembly.
   • If the front marker light assembly LH has removed, replace the new ona.