LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> LC 500 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Drivers Assistance Systems - ADAS >> Advanced Driver Assistance System - Service Information (Convertible) >> Millimeter Wave Radar Sensor >> Removal [05/2023 - ] >> Procedure

Removal [05/2023 - ]: Procedure

  1. REMOVE FRONT BUMPER ASSEMBLY 

    Refer to REMOVAL [05/2023 - ]

  2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY 
    NOTE:

    Do not reuse the millimeter wave radar sensor assembly if it has been dropped or subjected to a severe impact.

    1. Remove the 2 bolts and screw.
      GTY1241765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Screw
    2. Detach the guide and remove the millimeter wave radar sensor assembly.
scientia non olet · About LEMON Manuals