LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> ES 350 Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transmission System (UA80E) - Service Information (2 Of 4) >> Shift Lever Knob >> Installation [06/2018 - ] >> Procedure

Installation [06/2018 - ]: Procedure

  1. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 
    1. Install the shift lever knob sub-assembly to the transmission floor shift assembly.
      GTY809676Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Engage the 2 claws to connect the shifting hole cover sub-assembly as shown in the illustration.
      GTY809677Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE:

      Make sure that the shifting hole cover sub-assembly does not twist after installing the shift lever knob sub-assembly.

scientia non olet · About LEMON Manuals