LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> ES 300h Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Engine Control System (2GR-FKS) - Service Information) >> ACTIVE CONTROL ENGINE MOUNT (for Rear Side) >> Removal [10/2019 - 08/2021] >> Procedure

Removal [10/2019 - 08/2021]: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2024 Lexus ES 350, 2023 Lexus ES 350, 2022 Lexus ES 350, 2021 Lexus ES 350, and 2020 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT FRAME ASSEMBLY 

    Refer to REMOVAL [10/2019 - 08/2021]

  2. REMOVE REAR ENGINE MOUNTING INSULATOR 
    1. Remove the bolt and rear engine mounting insulator from the rear engine mounting bracket.
      GTY763554Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt and wire harness clamp bracket from the rear engine mounting insulator.
      GTY763555Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disengage the clamp and remove the vacuum hose from the rear engine mounting insulator.
      GTY763552Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals