LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2023 >> ES 300h Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System (A25A-FXS) - Service Information >> Oil Pump >> Removal [06/2018 - 08/2020] >> Procedure

Removal [06/2018 - 08/2020]: Procedure

  1. REMOVE TIMING CHAIN COVER ASSEMBLY 

    Refer to REMOVAL [06/2018 - 08/2020]

  2. REMOVE NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 54 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 56 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 55 [10/2019 - ]

  3. REMOVE OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 55 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 57 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 56 [10/2019 - ]

  4. REMOVE ENGINE OIL LEVEL SENSOR 

    See step  7

  5. REMOVE OIL PUMP BRACKET 

    Refer to PROCEDURE - Step 57 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 59 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 58 [10/2019 - ]

  6. REMOVE ENGINE BALANCER ASSEMBLY 

    Refer to PROCEDURE - Step 59 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 61 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 60 [10/2019 - ]

  7. REMOVE OIL PUMP ASSEMBLY 
    1. Remove the 3 bolts and oil pump assembly from the stiffening crankcase assembly.
      GTY754233Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STIFFENING CRANKCASE ASSEMBLY 

    Refer to PROCEDURE - Step 61 [06/2018 - 07/2019] , or refer to PROCEDURE - Step 63 [07/2019 - 10/2019] , or refer to PROCEDURE - Step 62 [10/2019 - ]

scientia non olet · About LEMON Manuals