LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> UX 200 Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter / Gauge / Display (Service Information) >> Combination Meter >> Installation [07/2022 - ] >> Procedure

Installation [07/2022 - ]: Procedure

  1. INSTALL COMBINATION METER ASSEMBLY 
    GTY835506Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    1. Connect the 2 connectors.
    2. Engage the clamp.
    3. Engage the guides.
      GTY812692Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Install the combination meter assembly with the 4 screws.
  2. INSTALL NO. 2 INSTRUMENT PANEL HOLE COVER 

    Refer to PROCEDURE - Step 12

  3. INSTALL INSTRUMENT PANEL HOLE COVER 

    Refer to PROCEDURE - Step 13

  4. INSTALL MULTI-DISPLAY 

    Refer to INSTALLATION [07/2022 - ]

  5. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL 

    Refer to INSTALLATION [10/2018 - ]

    NOTE:

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Refer to INITIALIZATION [07/2022 - ]

  6. CUSTOMIZE POWER TILT AND POWER TELESCOPIC STEERING COLUMN SYSTEM SETTINGS (for Power Tilt and Power Telescopic Steering Column) 

    Refer to CUSTOMIZE PARAMETERS [10/2018 - ]

scientia non olet · About LEMON Manuals