Meter Illumination is Always Dark [10/2015 - ]: Procedure
- CHECK CAN COMMUNICATION SYSTEM
- Check if CAN communication DTCs are output.
Refer to DIAGNOSIS SYSTEM [10/2015 - 08/2016] , or refer to DIAGNOSIS SYSTEM [08/2016 - 12/2017] , or refer to DIAGNOSIS SYSTEM [12/2017 - 08/2018] , or refer to DIAGNOSIS SYSTEM [08/2018 - 08/2019] , or refer to DIAGNOSIS SYSTEM [08/2019 - ]
Result
Result Proceed to CAN communication DTCs are not output. A CAN communication DTCs are output. B
Result:
B
GO TO CAN COMMUNICATION SYSTEM. Refer to HOW TO PROCEED WITH TROUBLESHOOTING [10/2015 - 08/2019] , or refer to HOW TO PROCEED WITH TROUBLESHOOTING [08/2019 - ]
Result:
A
See step 2
- Check if CAN communication DTCs are output.
- CHECK FOR DTC
- Check if lighting system DTCs are output.
w/ Automatic Headlight Beam Level Control System: Refer to DTC CHECK / CLEAR [10/2015 - 08/2019] , or refer to DTC CHECK / CLEAR [08/2019 - ]
w/o Automatic Headlight Beam Level Control System: Refer to DTC CHECK / CLEAR [10/2015 - 08/2019] , or refer to DTC CHECK / CLEAR [08/2019 - ]
Body Electrical > Main Body > Trouble Codes
Result
Result Proceed to DTC B1244 is not output. A DTC B1244 is output. B
Result:
B
GO TO DTC B1244
w/ Automatic Headlight Beam Level Control System: Refer to DTC B1244: Light Sensor Circuit Malfunction [10/2015 - 08/2019] , or refer to DTC B1244: Light Sensor Circuit [08/2019 - ]
w/o Automatic Headlight Beam Level Control System: Refer to DTC B1244: Light Sensor Circuit Malfunction [10/2015 - 08/2019] , or refer to DTC B1244: Light Sensor Circuit [08/2019 - ]
Result:
A
See step 3
- Check if lighting system DTCs are output.
- REPLACE COMBINATION METER ASSEMBLY
- Replace the combination meter assembly with a new one.
Refer to REMOVAL [10/2015 - 08/2016] , or refer to REMOVAL [08/2016 - 03/2018] , or refer to REMOVAL [03/2018 - 08/2019] , or refer to REMOVAL [08/2019 - ]
OK
The operation of the combination meter assembly returns to normal.
Result
Proceed to OK NG
Result:
OK
END
Result:
NG
REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU). Refer to REMOVAL [10/2015 - 08/2016] , or refer to REMOVAL [08/2016 - 03/2018] , or refer to REMOVAL [03/2018 - 08/2019] , or refer to REMOVAL [08/2019 - ]
- Replace the combination meter assembly with a new one.