Disposal [10/2015 - ]: Procedure

DISPOSE OF HOOD SUPPORT ASSEMBLY

Secure the hood support assembly horizontally in a vise with the piston rod pulled out.

Wearing safety glasses, gradually cut a part within the area (a) shown in the illustration using a metal saw to release the gas.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

SPECIFICATION:

Area	Measurement
a	50 mm (1.97 in.)

NOTE:

Although the gas inside the hood support assembly is colorless, odorless and harmless, metal debris may scatter. Therefore, cover hood support assembly with a piece of cloth or other material.