LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 450hL >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) (Service Information) (2 Of 2) >> License Plate Light Assembly >> Inspection [10/2015 - ] >> Procedure

Inspection [10/2015 - ]: Procedure

  1. INSPECT LICENSE PLATE LIGHT ASSEMBLY LH 
    1. Apply auxiliary battery voltage to the license plate light assembly LH and check that the light comes on.
      GTY664725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (License Plate Light Assembly LH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 1 (B)
      Auxiliary battery negative (-) → Terminal 2 (E)      		 License plate light comes on

      If the result is not as specified, replace the license plate light assembly LH.

  2. INSPECT LICENSE PLATE LIGHT ASSEMBLY RH 
    1. Apply auxiliary battery voltage to the license plate light assembly RH and check that the light comes on.
      GTY664725Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Component without harness connected
      (License Plate Light Assembly RH)

      OK

      Condition Specified Condition
      Auxiliary battery positive (+) → Terminal 1 (B)
      Auxiliary battery negative (-) → Terminal 2 (E)      		 License plate light comes on

      If the result is not as specified, replace the license plate light assembly RH.

scientia non olet · About LEMON Manuals