Installation [08/2019 - ]: Procedure

INSTALL SUSPENSION TOWER DAMPER
1. Install the suspension tower damper to the vehicle with the 4 nuts.
  Torque: 35 N*m (357 kgf*cm, 26 ft.*lbf)
  
  NOTE:
  Do not extend or compress the damper.
INSTALL NO. 2 LUGGAGE COMPARTMENT SIDE COVER PROTECTOR
Refer to PROCEDURE - Step 2
CONNECT REAR WHEEL HOUSE LINER LH
Refer to PROCEDURE - Step 3
INSTALL TAIL EXHAUST PIPE ASSEMBLY
Refer to INSTALLATION [03/2018 - ]
INSPECT FOR EXHAUST GAS LEAK
Refer to PROCEDURE - Step 8