Typical Malfunction Thresholds
WARNING: This page is about a different variant/trim than selected.
OFF malfunction
- When either condition below is met: OFF malfunction (A), (B), (C), (D), (E) or (F)OFF MALFUNCTION (A)
Turbine speed - Output speed x 1st gear ratio (NT-NO x 1st gear) 400 rpm or more OFF MALFUNCTION (B)Turbine speed - Output speed x 2nd gear ratio (NT-NO x 2nd gear) 400 rpm or more OFF MALFUNCTION (C)Turbine speed - Output speed x 3rd gear ratio (NT-NO x 3rd gear) 400 rpm or more OFF MALFUNCTION (D)Turbine speed - Output speed x 4th gear ratio (NT-NO x 4th gear) 400 rpm or more OFF MALFUNCTION (E)Turbine speed - Output speed x 5th gear ratio (NT-NO x 5th gear) 400 rpm or more OFF MALFUNCTION (F)Shift solenoid valve SLT ON malfunction
ON malfunction
- When either condition below is met: ON malfunction (A), (B), (C) or (D)ON MALFUNCTION (A), (B) AND (C)
When either condition below is met: (a) or (b) (a) Turbine speed/Output speed (NT/NO) 1.064 or more and 1.233 or less
(When Output speed less than 600 rpm)(b) Turbine speed - Output speed x 5th gear ratio -50 rpm or more and 50 rpm or less
(When Output speed 600 rpm or more)ON MALFUNCTION (D)Shift solenoid valve SLT ON malfunction