Reassembly [09/2015 - ]: Procedure

1. Using SST and a hammer, install a new front oil pump oil seal to the front oil pump body sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Depth

   • SST: 09350-32014 
     1. 09351-32140

   Standard Depth

   -0.2 to 0.2 mm (-0.00787 to 0.00787 in.)

2. Coat the lip of the front oil pump oil seal with MP grease.

1. Coat a new front oil pump body O-ring with ATF and install it to the front oil pump body sub-assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   NOTE:

   Ensure that the front oil pump body O-ring is not twisted.

1. Coat the front oil pump driven gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Mark

1. Coat the front oil pump drive gear with ATF and install it to the front oil pump body sub-assembly with the marked side facing upward.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a

   Mark

1. Using a T30 "TORX" socket wrench, install the stator shaft assembly to the front oil pump body and gear sub-assembly with the 10 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 9.8 N*m (100 kgf*cm, 87 in.*lbf) 

1. Using a T30 "TORX" socket wrench, install a new valve body oil strainer assembly to the stator shaft assembly with the 2 bolts.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

1. Coat 4 new clutch drum oil seal rings with ATF and install them to the stator shaft assembly.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

See step  1