LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 350L FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission [U881F] - Service Information (1 Of 2)) >> Speed Sensor >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL TRANSMISSION REVOLUTION SENSOR (NT) 
    1. Install the transmission revolution sensor (NT) to the automatic transaxle case sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

  2. INSTALL TRANSMISSION REVOLUTION SENSOR (NC3) 
    1. Using a T30 "TORX" socket wrench, install the transmission revolution sensor (NC3) to the automatic transaxle case sub-assembly with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the transmission revolution sensor (NC3) connector.
  3. INSTALL TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to INSTALLATION [09/2015 - ] 

scientia non olet · About LEMON Manuals