LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 350L FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Automatic Transmission [U881F] - Service Information (1 Of 2)) >> Combination Switch >> Installation [08/2019 - ] >> Procedure

Installation [08/2019 - ]: Procedure

WARNING: This page is about a different variant/trim than selected.
  1. INSTALL COMBINATION SWITCH ASSEMBLY 
    1. Install the combination switch assembly to the console box ornament with the 3 screws.
  2. INSTALL CONSOLE BOX ORNAMENT 
    1. Install the console box ornament to the shifting hole frame sub-assembly with the 4 screws.
    2. Install the console box bracket with the 2 screws.
  3. INSTALL CONSOLE PANEL SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT 

    Refer to PROCEDURE - Step 5

  5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 6

  6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 7

  7. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL 

    Refer to PROCEDURE - Step 8

  8. INSTALL REAR CONSOLE UPPER PANEL 

    Refer to PROCEDURE - Step 9

scientia non olet · About LEMON Manuals