Caution / Notice / Hint
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Lexus RX 350, 2021 Lexus RX 350, 2020 Lexus RX 350, 2019 Lexus RX 350, and 2018 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during ultrasonic sensor removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
| Front bumper assembly or front television camera assembly (w/ Panoramic view monitor system) | Front television camera view adjustment | Panoramic view monitor system | Refer to INITIALIZATION [09/2015 - 08/2019]
for Initialization Refer to CALIBRATION [09/2015 - 12/2017] , or refer to CALIBRATION [12/2017 - 08/2019] for Calibration |
| Front bumper assembly or ultrasonic sensor |
|
|
Refer to CALIBRATION [08/2016 - 12/2017] , or refer to CALIBRATION [12/2017 - 08/2019] |