Caution / Notice / Hint
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Lexus RX 350, 2021 Lexus RX 350, 2020 Lexus RX 350, 2019 Lexus RX 350, and 2018 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during side television camera assembly removal/installation are shown below.
NECESSARY PROCEDURE AFTER PARTS REMOVED/INSTALLED/REPLACED
| Replaced Part or Performed Procedure | Necessary Procedure | Effect/Inoperative Function when Necessary Procedure not Performed | Link |
|---|---|---|---|
|
Side television camera view adjustment | Panoramic view monitor system | Refer to INITIALIZATION [09/2015 - 08/2019]
, or refer to INITIALIZATION [08/2019 - ]
for Initialization Refer to CALIBRATION [09/2015 - 12/2017] , or refer to CALIBRATION [12/2017 - 08/2019] , or refer to CALIBRATION [08/2019 - ] for Calibration |
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.