LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 350L FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist & Monitoring System - Service Information) >> REAR CROSSING TRAFFIC ALERT BUZZER (w/o Rear No. 2 Seat) >> Removal [08/2016 - 08/2019] >> Procedure

Removal [08/2016 - 08/2019]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Lexus RX 350, 2021 Lexus RX 350, 2020 Lexus RX 350, 2019 Lexus RX 350, and 2018 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE TONNEAU COVER ASSEMBLY 

    Refer to PROCEDURE - Step 1 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 1 [12/2017 - 08/2019]

  2. REMOVE DECK BOARD ASSEMBLY 

    Refer to PROCEDURE - Step 2 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 2 [12/2017 - 08/2019]

  3. REMOVE REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 3 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 3 [12/2017 - 08/2019]

  4. REMOVE REAR DECK FLOOR BOX 

    Refer to PROCEDURE - Step 4 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 4 [12/2017 - 08/2019]

  5. REMOVE REAR NO. 4 FLOOR BOARD 

    Refer to PROCEDURE - Step 5 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 5 [12/2017 - 08/2019]

  6. REMOVE FRONT DECK FLOOR BOX 

    Refer to PROCEDURE - Step 6 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 6 [12/2017 - 08/2019]

  7. REMOVE DECK SIDE TRIM BOX RH 

    Refer to PROCEDURE - Step 7 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 7 [12/2017 - 08/2019]

  8. REMOVE REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 8 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 8 [12/2017 - 08/2019]

  9. REMOVE REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 11 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 11 [12/2017 - 08/2019]

  10. REMOVE REAR SEAT ASSEMBLY LH 

    Refer to REMOVAL [08/2016 - 08/2019]

  11. REMOVE UPPER QUARTER TRIM PAD LH 

    Refer to PROCEDURE - Step 23 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - 08/2019]

  12. REMOVE REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 24 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 24 [12/2017 - 08/2019]

  13. REMOVE REAR FLOOR FINISH SIDE PLATE LH 

    Refer to PROCEDURE - Step 25 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 25 [12/2017 - 08/2019]

  14. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK 

    Refer to PROCEDURE - Step 26 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 26 [12/2017 - 08/2019]

  15. REMOVE ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 27 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 27 [12/2017 - 08/2019]

  16. REMOVE NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 1 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 1 [12/2017 - 08/2019]

  17. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to PROCEDURE - Step 29 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 29 [12/2017 - 08/2019]

  18. REMOVE BLIND SPOT MONITOR BUZZER 
    1. Disconnect the connector.
      GTY669428Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the clamp and remove the blind spot monitor buzzer.
scientia non olet · About LEMON Manuals