LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 350L FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Park Assist & Monitoring System - Service Information) >> REAR CROSSING TRAFFIC ALERT BUZZER (w/o Rear No. 2 Seat) >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2022 Lexus RX 350, 2021 Lexus RX 350, 2020 Lexus RX 350, 2019 Lexus RX 350, and 2018 Lexus RX 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL BLIND SPOT MONITOR BUZZER 
    1. Connect the connector.
    2. Engage the clamp to install the blind spot monitor buzzer.
  2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH 

    Refer to PROCEDURE - Step 19 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 18 [12/2017 - ]

  3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY 

    Refer to PROCEDURE - Step 2 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 2 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 1 [08/2019 - ]

  4. INSTALL ROPE HOOK ASSEMBLY 

    Refer to PROCEDURE - Step 21 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 20 [12/2017 - ]

  5. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK 

    Refer to PROCEDURE - Step 22 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 21 [12/2017 - ]

  6. INSTALL REAR FLOOR FINISH SIDE PLATE LH 

    Refer to PROCEDURE - Step 23 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 22 [12/2017 - ]

  7. INSTALL REAR SEAT SIDE GARNISH LH 

    Refer to PROCEDURE - Step 24 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 23 [12/2017 - ]

  8. INSTALL UPPER QUARTER TRIM PAD LH 

    Refer to PROCEDURE - Step 25 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 24 [12/2017 - ]

  9. INSTALL REAR SEAT ASSEMBLY LH 

    Refer to INSTALLATION [09/2015 - ]

  10. INSTALL REAR DOOR SCUFF PLATE LH 

    Refer to PROCEDURE - Step 41 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 40 [12/2017 - ]

  11. INSTALL REAR FLOOR FINISH PLATE 

    Refer to PROCEDURE - Step 50 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 49 [12/2017 - ]

  12. INSTALL DECK SIDE TRIM BOX RH 

    Refer to PROCEDURE - Step 51 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 50 [12/2017 - ]

  13. INSTALL FRONT DECK FLOOR BOX 

    Refer to PROCEDURE - Step 52 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 51 [12/2017 - ]

  14. INSTALL REAR NO. 4 FLOOR BOARD 

    Refer to PROCEDURE - Step 53 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 52 [12/2017 - ]

  15. INSTALL REAR DECK FLOOR BOX 

    Refer to PROCEDURE - Step 54 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 53 [12/2017 - ]

  16. INSTALL REAR NO. 3 FLOOR BOARD 

    Refer to PROCEDURE - Step 55 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 54 [12/2017 - ]

  17. INSTALL DECK BOARD ASSEMBLY 

    Refer to PROCEDURE - Step 56 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 55 [12/2017 - ]

  18. INSTALL TONNEAU COVER ASSEMBLY 

    Refer to PROCEDURE - Step 57 [09/2015 - 12/2017] , or refer to PROCEDURE - Step 56 [12/2017 - ]

scientia non olet · About LEMON Manuals