LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> RX 350L FWD >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pan And Oil Level Sensor >> Installation [09/2015 - ] >> Procedure

Installation [09/2015 - ]: Procedure

  1. INSTALL ENGINE OIL LEVEL SENSOR 
    1. Install the engine oil level sensor with the 2 bolts.

      Torque: 10 N.m (102 kgf/cm, 7 ft.lbf) 

    2. Install a new clip to the engine oil level sensor.
    3. Connect the engine oil level sensor connector.
  2. INSTALL OIL STRAINER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 53

  3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 54

  4. INSTALL FRONT FRAME ASSEMBLY 

    Refer to INSTALLATION [09/2015 - 08/2016] , or refer to INSTALLATION [08/2016 - 08/2019] , or refer to INSTALLATION [08/2019 - ]

  5. ADD ENGINE OIL 

    See step  4 [09/2015 - 07/2021], or see step  4 [07/2021 - ]

  6. CHECK ENGINE OIL LEVEL 

    Refer to PROCEDURE - Step 1

  7. INSPECT FOR OIL LEAK 

    See step  5 [09/2015 - 07/2021], or see step  5 [07/2021 - ]

scientia non olet · About LEMON Manuals