Installation [09/2015 - ]: Procedure

1. Apply a light coat of engine oil to the O-ring.
2. Using a 22 mm deep socket wrench, install the PCV valve (ventilation valve sub-assembly) to the cylinder head cover sub-assembly LH.

   Torque: 5.0 N.m (51 kgf/cm, 44 in.lbf) 

   NOTE:

   When reusing the PCV valve (ventilation valve sub-assembly), inspect the O-ring.

1. Connect the ventilation hose to the PCV valve (ventilation valve sub-assembly) and slide the clip to secure it.

Refer to PROCEDURE - Step 40 [09/2015 - 08/2016] , or refer to PROCEDURE - Step 40 [08/2016 - 12/2017] , or refer to PROCEDURE - Step 40 [12/2017 - 08/2019] , or refer to PROCEDURE - Step 40 [08/2019 - ]