LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Electronically Controlled Brake System - Diagnostic Codes (6 Of 6) & Symptom Tests >> Electronically Controlled Brake System >> DTC P05DB-00: Brake Pedal Position Sensor "B"; DTC P05E0-00: Brake Pedal Position Sensor "A"/"B" [03/2024 - ] >> Monitor Description

Monitor Description

P05DB: 

  1. When the No. 2 skid control ECU (brake actuator assembly) detects that the difference between the output of brake pedal stroke sensor 1 and brake pedal stroke sensor 2 is invalid, the MIL is illuminated and a DTC is stored.

P05E0: 

  1. The No. 2 skid control ECU (brake actuator assembly) monitors the output value of the brake pedal stroke sensor assembly.

    When the ratio between the output of brake pedal stroke sensor 1 and brake pedal stroke sensor 2 is outside the normal range, the No. 2 skid control ECU (brake actuator assembly) judges that the brake pedal stroke sensor assembly is malfunctioning, the MIL is illuminated and a DTC is stored.

scientia non olet · About LEMON Manuals