LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels / Trim - Service Information (2 Of 2) >> Roof Drip Side Finish Moulding >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE ROOF DRIP SIDE MOULDING 
    1. GTY1053971Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Remove in this Direction - -
      1. Apply protective tape around the roof drip side moulding as shown in the illustration.
      2. Using moulding remover, disengage the 2 clips and guide to remove the roof drip side moulding as shown in the illustration.
        NOTE:
        • Do not remove the roof drip side finish moulding clip.
        • If a roof drip side finish moulding clip is damaged or falls off, replace it with a new one.
scientia non olet · About LEMON Manuals