LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Accessories & Equipment >> Interior/Illumination Lights >> Lighting System (Int) - Service Information >> Vanity Light >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE VANITY LIGHT ASSEMBLY 
    1. GTY1073824Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *A for LH Side *B for RH Side
      1. Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
      2. Disengage the guide and pull out the vanity light assembly.
      3. Disconnect the connector to remove the vanity light assembly.
scientia non olet · About LEMON Manuals