LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 450h+ Base >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Interior Panels / Trim - Service Information (1 Of 2) >> Front Console Box >> Reassembly [11/2021 - ] >> Procedure

Reassembly [11/2021 - ]: Procedure

  1. INSTALL CONSOLE COMPARTMENT DOOR INNER COVER SUB-ASSEMBLY 
  2. INSTALL REAR CONSOLE ARMREST ASSEMBLY 
    1. GTY1227275Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Install in this Direction - -
      1. Engage the 3 claws.
      2. Install the 2 screws.
      3. Engage the 4 claws to install the upper console retainer as shown in the illustration.
    2. GTY1227346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Place Hand Here Install in this Direction
      1. Insert the front and rear retainer into the groove of the rear console armrest assembly.
      2. While holding the position shown in the illustration, close until the lock plate strikes the retainer.
      3. Push the release lever and push the rear console armrest assembly in the direction shown in the illustration.
      4. Check that the rear console armrest assembly can be opened and closed.
  3. INSTALL NO. 2 BOX SIDE PANEL 
  4. INSTALL NO. 1 BOX SIDE PANEL 
  5. INSTALL CONSOLE BOX ORNAMENT 
  6. INSTALL REAR CONSOLE BOX WIRE 
  7. INSTALL CONSOLE BOX ILLUMINATION LIGHT ASSEMBLY 
scientia non olet · About LEMON Manuals