LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 350 Base >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle System - Service Information (1 Of 2) >> Transmission Wire >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE FRONT ENGINE MOUNTING INSULATOR 

    Refer to REMOVAL [11/2021 - ]

  2. REMOVE FRONT FENDER APRON SEAL LH 

    Refer to PROCEDURE - Step 12 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 12 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 12 [03/2024 - ]

  3. REMOVE TRANSMISSION OIL (ATF WARMER) COOLER 

    Refer to REMOVAL [11/2021 - ] 

  4. SEPARATE ENGINE WIRE 
    1. GTY1061816Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the nut and separate the vacuum hose sub-assembly.
      2. Disengage the claw, rotate the lever and disconnect the transmission wire connector.
      3. Remove the bolt and separate the engine wire.
  5. REMOVE OIL COOLER BRACKET 
    1. GTY1062721Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE OIL COOLER UNION SUB-ASSEMBLY 
    1. GTY1062876Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the bolt to separate the oil cooler union sub-assembly bracket portion from the automatic transaxle case sub-assembly.
      2. Remove the oil cooler union bolt, 2 gaskets and oil cooler union sub-assembly from the automatic transaxle case sub-assembly.
  7. REMOVE OUTLET NO. 1 OIL COOLER HOSE 

    HINT: 

    Perform this procedure only when replacement of the outlet No. 1 oil cooler hose or oil cooler union sub-assembly are necessary.

    1. GTY1063142Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE TRANSMISSION CASE SIDE COVER 
    1. GTY1061366Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE TRANSMISSION WIRE 
    1. GTY1060833Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disengage the clamp to disconnect the transmission wire from the solenoid lock plate.
      2. Using a screwdriver, disconnect the 7 solenoid valve connectors using the procedure shown in the illustration.
      3. Using a screwdriver, disconnect the solenoid valve connector using the procedure shown in the illustration.
      4. Disconnect the solenoid valve connector.
    2. GTY1061372Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. GTY1061402Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. GTY1061401Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. GTY1062028Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    6. GTY1063011Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    7. GTY1062067Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals