LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 350 Base >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System - Service Information >> FUEL INJECTOR (for Port Injection) >> Removal [11/2021 - 03/2023] >> Procedure

Removal [11/2021 - 03/2023]: Procedure

  1. PRECAUTION 
    NOTE:

    After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

    Refer to BEFORE DISCONNECTING BATTERY [11/2021 - ]
  2. DISCHARGE FUEL SYSTEM PRESSURE 

    Refer to PRECAUTION [11/2021 - ]

  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    Refer to PROCEDURE - Step 2

  4. REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY 
    Refer to PROCEDURE - Step 25
  5. REMOVE NO. 2 ENGINE COVER SUB-ASSEMBLY 

    Refer to PROCEDURE - Step 4

  6. REMOVE AIR CLEANER CAP WITH AIR CLEANER HOSE 

    Refer to PROCEDURE - Step 16

  7. DISCONNECT ENGINE WIRE 

    Refer to PROCEDURE - Step 6

  8. REMOVE PURGE VALVE (PURGE VSV) 

    Refer to PROCEDURE - Step 13

  9. REMOVE AIR TUBE ASSEMBLY 
    Refer to PROCEDURE - Step 8
  10. REMOVE FUEL DELIVERY GUARD 
    1. GTY1076651Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE EFI FUEL PIPE CLAMP 
    1. GTY1076980Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. DISCONNECT FUEL TUBE SUB-ASSEMBLY 
    1. GTY1077322Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the fuel tube sub-assembly from the fuel delivery pipe.

        Refer to PRECAUTION [11/2021 - ]

  13. REMOVE FUEL DELIVERY PIPE 
    NOTE:

    If fuel intrudes into the combustion chamber, there may be adverse effects to the engine main body.
    1. GTY1076798Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Remove the 2 bolts and fuel delivery pipe with the 4 port fuel injector assemblies from the cylinder head sub-assembly.
        NOTE:

        Be careful not to drop the port fuel injector assemblies when removing the fuel delivery pipe.

  14. REMOVE FUEL DELIVERY SPACER 
    1. GTY1076988Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE INJECTOR VIBRATION INSULATOR 
    1. GTY1076965Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE NO. 5 ENGINE WIRE 
    1. GTY1076967Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE PORT FUEL INJECTOR ASSEMBLY 
    NOTE:
    GTY993474Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    • Attach a tag or label with the corresponding cylinder number to each port fuel injector assembly so that they can be installed to their original locations.
    • Cover the port fuel injector assemblies with plastic bags to prevent damage and contamination.
    1. GTY1076963Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals