LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 350 Base >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Engine Lubrication System - Service Information >> Oil Pressure Switching Valve >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. REMOVE FRONT FENDER APRON SEAL RH 

    Refer to PROCEDURE - Step 13 [11/2021 - 03/2023] , or refer to PROCEDURE - Step 13 [03/2023 - 03/2024] , or refer to PROCEDURE - Step 13 [03/2024 - ]

  2. DISCONNECT ENGINE WIRE 
    1. GTY1075624Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE OIL PRESSURE CONTROL VALVE ASSEMBLY 
    1. GTY1076076Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      1. Disconnect the oil pressure control valve assembly connector.
      2. Using an 8 mm socket wrench, remove the bolt and oil pressure control valve assembly from the timing chain cover assembly.
scientia non olet · About LEMON Manuals