LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> NX 350 Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System (Hydraulic) - Service Information >> VACUUM PUMP (for A25A-FKS) >> Removal [11/2021 - ] >> Procedure

Removal [11/2021 - ]: Procedure

  1. DISCONNECT NO. 1 VACUUM HOSE CONNECTOR 
    1. GTY1063621Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      *a Retainer - -
      Pinch Pull off
      1. Pinch the retainer of the No. 1 vacuum hose connector, and then pull the No. 1 vacuum hose connector off of the vacuum pump assembly.
        NOTE:

        Be sure to disconnect the No. 1 vacuum hose connector by hand.

  2. SEPARATE ENGINE WIRE 
    1. GTY1064132Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE VACUUM PUMP ASSEMBLY 
    1. GTY1064131Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE NO. 1 VACUUM PUMP O-RING 
    1. GTY1063891Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals