LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LX 600 Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission System - Service Information (1 Of 2) >> Transmission Wire >> Removal [12/2021 - ] >> Procedure

Removal [12/2021 - ]: Procedure

  1. REMOVE TRANSMISSION VALVE BODY ASSEMBLY 

    Refer to REMOVAL [12/2021 - ] 

  2. REMOVE TRANSMISSION REVOLUTION SENSOR (SP2) 

    See step  2

  3. REMOVE TRANSMISSION REVOLUTION SENSOR (NT) 

    See step  3

  4. REMOVE TRANSMISSION WIRE 
    1. GTY1037308Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Turn Pull Down the Lever
      1. Remove the 3 bolts and 3 transmission wire clamps.
      2. Using a 10 mm union nut wrench, remove the bolt as shown in the illustration.
      3. Disconnect the transmission wire connector.

        HINT: 

        Disengage the claw, pull down the lever, and then disconnect the transmission wire connector.

      4. Pull out the transmission wire from the automatic transmission assembly.
      5. Remove the O-ring from the transmission wire.
scientia non olet · About LEMON Manuals