Caution / Notice / Hint

HINT: 

• Use the same procedure for the RH and LH sides.
• The procedure described below is for the LH side.

COMPONENTS (REMOVAL) 

Fig 1: Wheel Opening Moulding (For Front) Removal Components

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Procedure		Part Name Code
1	FRONT FENDER MOULDING SUB-ASSEMBLY LH	75602A	See step  1	-	-
2	NO. 3 BODY OUTSIDE MOULDING PAD	75698A	See step  2	-	-
3	NO. 1 BODY OUTSIDE MOULDING PAD	75696	See step  3	-	-