Caution / Notice / Hint

NOTE:

When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
If the headlight ECU sub-assembly LH has been replaced, it is necessary to synchronize the vehicle information and initialize the headlight ECU sub-assembly LH.
w/o Adaptive High Beam System:

Refer to REGISTRATION [12/2021 - ]

w/ Adaptive High Beam System:

Refer to REGISTRATION [12/2021 - ]