DTC P2713-13: Pressure Control Solenoid "D" Circuit Open [11/2021 - 10/2023]: Description
Based on signals from the accelerator position sensor and transmission revolution sensor (SP2), the hybrid vehicle control ECU assembly controls the solenoid (SLT) valve using a predetermined current. As a result, the line pressure is adjusted to a pressure that is appropriate for the throttle angle and requested torque.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Warning Indicate |
|---|---|---|---|---|---|
| P2713-13 | Pressure Control Solenoid "D" Circuit Open | The current does not flow appropriately, even when operation commands are sent from the hybrid vehicle control ECU assembly to the solenoid (SLT) valve. (1-trip detection logic) |
|
Comes on | Master Warning: Comes on |
RELATED DATA LIST
| DTC No. | Data List |
|---|---|
| P2713-13 | Solenoid (SLT)* |
- *: SLT solenoid forced operation request status. This item only changes when an Active Test is performed.
RELATED ACTIVE TEST
| DTC No. | Active Test |
|---|---|
| P2713-13 | Activate the Solenoid (SLT) |