LEMON Manuals: Even more car manuals for everyone
Home >> Lexus >> 2022 >> LS 500h RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Vehicle Proximity Notification System - Service Information) >> Vehicle Approaching Speaker >> Removal [09/2019 - 10/2020] >> Procedure

Removal [09/2019 - 10/2020]: Procedure

WARNING: This page is about a different car, the 2020 Lexus LS 500h, 2019 Lexus LS 500h, and 2018 Lexus LS 500h. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE FRONT BUMPER ASSEMBLY 
    1. for Sport Package:

      Refer to REMOVAL [09/2018 - 10/2020]

    2. except Sport Package:

      Refer to REMOVAL [09/2018 - 10/2020]

  2. REMOVE VEHICLE APPROACHING SPEAKER ASSEMBLY 
    NOTE:
    • When removing the vehicle approaching speaker, take care not to damage it.
    • Do not reuse a vehicle approaching speaker that has been dropped or subjected to a strong shock.
    • Do not push the vehicle approaching speaker assembly center area.
    1. Remove the bolt.
      GTY966158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Bolt
      Connector
    2. Detach the guide and remove the vehicle approaching speaker assembly.
    3. Disconnect the connector.
scientia non olet · About LEMON Manuals