DTC C1341: Hydraulic System Malfunction (FR); DTC C1342: Hydraulic System Malfunction (FL); DTC C1343: Hydraulic System Malfunction (RR); DTC C1344: Hydraulic System Malfunction (RL) [10/2020 - 10/2023]: Description
The skid control ECU assembly controls braking force according to the hybrid control system regenerative braking force and provides the hydraulic pressure necessary for operating each wheel cylinder according to the wheel cylinder pressure sensor.
DTCs may be stored if one of the following occurs:
- Brake fluid leaks.
- Wheel cylinder vibrates due to uneven wear of a brake disc.
- Foreign matter enters solenoid valve.
- Line pressure drops during air bleeding.
- Brake pads are replaced.
- Rotors are replaced.
HINT:
When replacing the brake pads, retracting the brake caliper pistons and installing new brake pads will greatly increase the clearance between the brake pads and brake discs. This will result in a significant possibility of this DTC being stored the next time the brake pedal is depressed. As this is not a malfunction, clear the DTC if it is stored for this reason.
| DTC No. | Detection Item | INF Code | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|---|
| C1341 | Hydraulic System Malfunction (FR) | 551 552 553 554 555 |
|
|
Comes on (When only SAE code C14AA or SAE code C14AB is stored) |
|
| C1342 | Hydraulic System Malfunction (FL) | 561 562 563 564 565 |
|
|
Comes on (When only SAE code C14A8 or SAE code C14A9 is stored) |
|
| C1343 | Hydraulic System Malfunction (RR) | 571 572 573 574 575 |
|
|
Comes on (When only SAE code C14AE or SAE code C14AF is stored) |
|
| C1344 | Hydraulic System Malfunction (RL) | 581 582 583 584 585 |
|
|
Comes on (When only SAE code C14AC or SAE code C14AD is stored) |
|