Component Operating Range
C14A8
| All of the following conditions are met | - |
| Front wheel cylinder pressure sensor LH fail | Not detected |
| Front wheel brake LH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Front wheel cylinder pressure sensor LH | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14A9
| All of the following conditions are met | - |
| Front wheel cylinder pressure sensor LH fail | Not detected |
| Front wheel brake LH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Front wheel cylinder pressure sensor LH decreases after brake pressure control solenoid (SLRFL) on | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AA
| All of the following conditions are met | - |
| Front wheel cylinder pressure sensor RH fail | Not detected |
| Front wheel brake RH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Front wheel cylinder pressure sensor RH | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AB
| All of the following conditions are met | - |
| Front wheel cylinder pressure sensor RH fail | Not detected |
| Front wheel brake RH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Front wheel cylinder pressure sensor RH decreases after brake pressure control solenoid (SLRFR) on | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AC
| All of the following conditions are met | - |
| Rear wheel cylinder pressure sensor LH fail | Not detected |
| Rear wheel brake LH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Rear wheel cylinder pressure sensor LH | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AD
| All of the following conditions are met | - |
| Rear wheel cylinder pressure sensor LH fail | Not detected |
| Rear wheel brake LH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Rear wheel cylinder pressure sensor LH decreases after brake pressure control solenoid (SLRRL) on | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AE
| All of the following conditions are met | - |
| Rear wheel cylinder pressure sensor RH fail | Not detected |
| Rear wheel brake RH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Rear wheel cylinder pressure sensor RH | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |
C14AF
| All of the following conditions are met | - |
| Rear wheel cylinder pressure sensor RH fail | Not detected |
| Rear wheel brake RH | On |
| ABS operation | Off |
| Accumulator pressure sensor fail | Not detected |
| Brake pressure control solenoid open current learning | Complete |
| Rear wheel cylinder pressure sensor RH decreases after brake pressure control solenoid (SLRRR) on | 0.5 MPa (5.1 kgf/cm2 , 73 psi) or more |
| Malfunction criteria | Not met |