DTC C124A-00: ECM Communication [11/2021 - 10/2023]: Description
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C124A-00 | ECM Communication | Either of the following is detected:
|
|
Does not come on | Output ECU: No. 2 skid control ECU (brake actuator assembly) |
C124A-00 DTC DETECTION CONDITIONS
| Vehicle Condition | |||
|---|---|---|---|
| Pattern 1 | Pattern 2 | ||
| Diagnosis Condition | - | - | - |
| Malfunction Status | The engine type, powertrain variation and destination information sent from the hybrid vehicle control ECU assembly do not match the information stored in the No. 2 skid control ECU (brake actuator assembly) | ◦ | - |
| No system information stored in the No. 2 skid control ECU (brake actuator assembly) | - | ◦ | |
| Detection Time | - | - | |
| Number of Trips | 1 trip | 1 trip | |
HINT:
DTC will be output when conditions for either of the patterns in the table above are met.