Typical Enabling Conditions
C050D (CASE 4)
| Monitor runs whenever the following DTCs are not stored | C050D (Case 1 to 3): Wheel speed sensor (RL) range/performance C050E: Wheel speed sensor (RL) voltage circuit open C050F: Wheel speed sensor (RL) voltage circuit high C0510: Wheel speed sensor (RL) intermittent/erratic C1241: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14E7: Wheel speed sensor (RL) voltage circuit low |
| All of the following conditions are met | - |
| Chassis dynamometer mode | Off |
| +BS voltage | Less than 17.4 V |
| IG1 | On |
C050D (CASE 5)
| Monitor runs whenever the following DTCs are not stored | C050D (Case 1 to 4): Wheel speed sensor (RL) range/performance C050E: Wheel speed sensor (RL) voltage circuit open C050F: Wheel speed sensor (RL) voltage circuit high C0510: Wheel speed sensor (RL) intermittent/erratic C1241: Brake system voltage input out of range low C137C: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14E7: Wheel speed sensor (RL) voltage circuit low |
| All of the following conditions are met | - |
| Chassis dynamometer mode | Off |
| +BS voltage | 9.5 V or more, and 17.4 V or less |
| Lowest speed sensor output value | Higher than 3 km/h (1.864 mph) |
| Direction of 4 wheels | Determined |
| Speed sensor power supply voltage | Higher than 4.1 V |
| The number of wheels which direction is reverse | 3 or more |
C0513 (CASE 4)
| Monitor runs whenever the following DTCs are not stored | C0513 (Case 1 to 3): Wheel speed sensor (RR) range/performance C0514: Wheel speed sensor (RR) voltage circuit open C0515: Wheel speed sensor (RR) voltage circuit high C0516: Wheel speed sensor (RR) intermittent/erratic C1241: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14EA: Wheel speed sensor (RR) voltage circuit low |
| All of the following conditions are met | - |
| Chassis dynamometer mode | Off |
| +BS voltage | Less than 17.4 V |
| IG1 | On |
C0513 (CASE 5)
| Monitor runs whenever the following DTCs are not stored | C0513 (Case 1 to 4): Wheel speed sensor (RR) range/performance C0514: Wheel speed sensor (RR) voltage circuit open C0515: Wheel speed sensor (RR) voltage circuit high C0516: Wheel speed sensor (RR) intermittent/erratic C1241: Brake system voltage input out of range low C137C: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14EA: Wheel speed sensor (RR) voltage circuit low |
| All of the following conditions are met | - |
| Chassis dynamometer mode | Off |
| +BS voltage | 9.5 V or more, and 17.4 V or less |
| Lowest speed sensor output value | Higher than 3 km/h (1.864 mph) |
| Direction of 4 wheels | Determined |
| Speed sensor power supply voltage | Higher than 4.1 V |
| The number of wheels which direction is reverse | 3 or more |