DTC C0063-28: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure; DTC C0063-96: Yaw Rate Sensor Component Internal Failure [11/2021 - 10/2023]: Description
The yaw rate sensor has a built-in airbag ECU assembly.
These DTCs are stored when the No. 2 skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate sensor (airbag ECU assembly).
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | MIL | Note |
|---|---|---|---|---|---|
| C0063-28 | Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure | With the vehicle stationary, the yaw rate sensor output value is not 0°/s. | Yaw rate sensor (airbag ECU assembly) | Does not come on | Output ECU: No. 2 skid control ECU (brake actuator assembly) |
| C0063-96 | Yaw Rate Sensor Component Internal Failure | With the +BS terminal voltage between 9.5 and 17.4 V, a data malfunction signal is received from a yaw rate sensor. | Yaw rate sensor (airbag ECU assembly) | Does not come on | Output ECU: No. 2 skid control ECU (brake actuator assembly) |