Typical Enabling Conditions
| Monitor runs whenever the following DTCs are not stored | C051F: Acceleration sensor correlation C0520 (Case 1): Acceleration sensor (GL1, GL2) out of range C0520 (Case 2): Acceleration sensor internal malfunction C1241: Brake system voltage input out of range low C137D: Brake system voltage input out of range high C14D7: Acceleration sensor voltage circuit/open U0125: Lost communication with multi-axis acceleration sensor module |
| All of the following conditions are met | - |
| Communication status with yaw rate and acceleration sensor (airbag ECU assembly) | Valid |
| IG1 | On |
| +BS voltage | 9.5 V or more, and 17.4 V or less |
| Sensor power supply voltage (IG) | Valid |