DTC C1245: Deceleration Sensor [10/2020 - 10/2023]: Procedure

1. Check for DTC.

   Refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

   Chassis > ABS/VSC/TRAC > Trouble Codes 

   Result

   Result	Proceed to
   DTC is not output	A
   DTC is output	B

Result: 

B 

GO TO BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS. Refer to  DIAGNOSTIC TROUBLE CODE CHART [10/2020 - 10/2023] 

Result: 

A 

See step  2

1. Clear the DTC.

   Refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

   Chassis > Electric Parking Brake > Clear DTCs 

2. Turn the power switch off.
3. Check for DTC.

   Refer to DTC CHECK / CLEAR [10/2020 - 10/2023]

   Chassis > Electric Parking Brake > Trouble Codes 

   Result

   Result	Proceed to
   DTC is output	A
   DTC is not output	B

Result: 

A 

REPLACE YAW RATE SENSOR. Refer to  REMOVAL [10/2020 - 11/2021]  , or refer to  REMOVAL [11/2021 - 10/2023] 

Result: 

B 

USE SIMULATION METHOD TO CHECK. Refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2020 - 11/2021]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [11/2021 - 10/2022]  , or refer to  HOW TO PROCEED WITH TROUBLESHOOTING [10/2022 - 10/2023]