| C1247 |
Stroke Sensor |
171
172
173
174
175
181
182
183 |
- INF Code: 171
- Sensor supply voltage (VCSK) is 4.7 V or less, or 5.4 V or more for 0.2 seconds or more.
- INF Code: 172
- Sensor output voltage 1 (SKS) is 6% or less, or 90% or more of sensor supply voltage (VCSK) for 0.2 seconds or more.
- INF Code: 173
- Sensor output voltage 2 (SKS2) is 6% or less, or 90% or more of sensor supply voltage (VCSK) for 0.2 seconds or more.
- INF Code: 174
- The stroke value converted from the sensor output 1 (SKS) fluctuates due to noise.
- INF Code: 175
- The stroke value converted from the sensor output 2 (SKS2) fluctuates due to noise.
- INF Code: 181
- A power source related malfunction other than INF codes 171, 172, 173, 174, 175, 182, or 183 occurs.
- INF Code: 182
- Difference between the output voltage of sensor 1 (SKS) and the output voltage of sensor 2 (SKS2) differs.
- INF Code: 183
- Compared to the output voltage of sensor 1 (SKS) and sensor 2 (SKS2), the output voltage of master cylinder pressure sensor 1 (PMC1) and master cylinder pressure sensor 2 (PMC2) are low.
|
- INF Code: 171
- Open or short in brake pedal stroke sensor assembly power supply circuit
- Improperly connected connector, deformation or corrosion of terminals
- Skid control ECU assembly
- INF Code: 172, 173, 174, 175, 181, 182
- Open or short in wire harness
- Improperly connected connector, deformation or corrosion of terminals
- Brake pedal stroke sensor assembly
- INF Code: 183
- Open or short in wire harness
- Improperly connected connector, deformation or corrosion of terminals
- Brake pedal stroke sensor assembly
- Brake actuator assembly
|
Comes on
(When only SAE code C0562, C124B, P057C, P057D, P057E, P05DD, P05DE, P05DF or SAE code P05E0 is stored) |
- INF Code 171: SAE Code C0562
- INF Code 172: SAE Code P057C and P057D
- INF Code 173: SAE Code P05DD and P05DE
- INF Code 174: SAE Code P057E
- INF Code 175: SAE Code P05DF
- INF Code 181: SAE Code C124B
- INF Code 182: SAE Code P05E0
- INF Code 184: SAE Code P05E0
|
| C1392 |
Zero Point Calibration of Stroke Sensor undone |
- |
Zero point calibration of brake pedal stroke sensor assembly is unfinished. |
Brake pedal stroke sensor zero point calibration incomplete (Initialization and calibration of linear solenoid valve incomplete) |
Only DTC C1392 (INF code -) is stored: Does not come on
SAE Code C1392 is stored: Comes on |
INF Code -: SAE Code C1392 |