Typical Malfunction Thresholds
C1202 (CASE 1)
| All of the following conditions are met | - |
| Brake fluid level warning switch (brake master cylinder reservoir assembly) state for 10 seconds or more | On |
| Brake booster with accumulator pump assembly operation for 10 seconds or more | On |
| Brake | On |
C1202 (CASE 2)
| Both of the following conditions are met | - |
| Brake fluid level warning switch (brake master cylinder reservoir assembly) remains on after skid control ECU power on | On |
| Brake | On |
C120F
| Brake fluid level warning switch (brake master cylinder reservoir assembly) voltage | Higher than 4.07 V, and less than 7.5 V |