Removal [10/2017 - 10/2020]: Procedure

1. except Sport Package

   Refer to REMOVAL [10/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020]

2. for Sport Package

   Refer to REMOVAL [10/2017 - 09/2018] , or refer to REMOVAL [09/2018 - 10/2020]

See step  1

HINT: 

Use the same procedure for the RH and LH sides.

1. Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

   Detach the claw and disconnect the No. 1 headlight cleaner hose as shown in the illustration.

2. Remove the screw.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Press part A, detach the claw and guide and remove the headlight washer actuator sub-assembly LH as shown in the illustration.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   *a	A	-	-
   	Remove in this Direction (1)		Remove in this Direction (2)

4. Remove the spring nut from the headlight washer actuator sub-assembly LH.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Remove in this Direction

HINT: 

Use the same procedure for the RH and LH sides.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using a heat light, heat the No. 2 washer bracket.
   WARNING:

   • Do not touch the heat light and heated parts.
   • Touching the heat light may result in burns.
   • Touching heated parts for a long time may result in burns.

   HINT: 

   20 to 30°C for 3 to 5 minutes.

2. Remove the No. 2 washer bracket.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT: 

Use the same procedure described for the No. 2 washer bracket.

Refer to PROCEDURE - Step 7 [10/2017 - 09/2018] , or refer to PROCEDURE - Step 7 [09/2018 - 09/2019] , or refer to PROCEDURE - Step 7 [09/2019 - 10/2020]