Removal [10/2023 - ]: Procedure
- PRECAUTION (w/ Hands Free Power Trunk Lid) NOTE:
After turning the power switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal.
Refer to PRECAUTION [10/2023 - ]
- REMOVE LUGGAGE COMPARTMENT MAT SUB-ASSEMBLY (w/ Hands Free Power Trunk Lid)
Refer to PROCEDURE - Step 25
- DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL (w/ Hands Free Power Trunk Lid)
Refer to PROCEDURE - Step 4
- REMOVE REAR BUMPER ASSEMBLY
Refer to REMOVAL [10/2023 - ]
- REMOVE KICK DOOR CONTROL BRACKET
Refer to PROCEDURE - Step 6
- REMOVE REAR NO. 6 LIDAR CLEANER HOSE
Refer to PROCEDURE - Step 2
- REMOVE REAR LIDAR ADVANCED DRIVE SENSOR ASSEMBLY NOTE:
- Do not reuse the rear LiDAR advanced drive sensor assembly if it has been dropped or subjected to a severe impact.
- The rear LiDAR advanced drive sensor assembly is a precision instrument. Take care not to damage it during removal and installation.
- If the lens surface of the rear LiDAR advanced drive sensor assembly is dirty, install the rear LiDAR advanced drive sensor assembly after cleaning it with a soft cloth or the like while taking care not to damage it.